More OE Replacement Looms & Harnesses are coming!

As we continue to move forwards in our mission to make brand new, off the shelf replacement wiring looms for early Ford Falcon models, we are happy to announce a new release of sub-looms now available to purchase.

These are reproduced from original wiring, built as close as possible to colour, termination and finish of the original samples. All of our terminations are crimped and soldered for durability, and while some are plug and play, most of these will require threading through your firewall grommet if replacing in situ.

All of these looms are designed to replace old, damaged or rusted wiring in your Falcon and we have more sub-looms coming in the near future with our end of year aim to have 100% brand new off-the-shelf OE replacement looms that are as close to the originals as you can get!

Share

XW/XY Falcon GS/GT Dash Light Upgrade Plug & Play Loom

GS/GT Dash Light Upgrade Loom

Now available is our plug and play XW/XY GS/GT dashboard upgrade light/illumination loom which caters for those upgrading their standard XW/XY dashboard to a GS/GT dash.

The kit is designed to plug into existing power/earth feeds without the need to cut/chop/splice into anything. There are three (3) globe holders supplied (Oil, Fuel & Temp) pre-fitted with LED globes.

Now you can upgrade your dash without the need of a sparky!

Share

Bronze Wine XY GT Restoration

This absolutely stunning Bronze Wine XY GT Ford Falcon that was restored by Rodney Plowman Restorations was completely rebuilt/restored with all parts supplied by us! We’re super proud of this build as it was dropped off to the RPR team as a painted rolling shell, ready for a concours build.

Rodney suspected the bodywork was not as sound as it should have been and long story short the car ended up being acid dipped and started again. We supplied all parts, reproduction or restored plus all of our in-house wiring looms and the final result is purely stunning!

You can see the full story on the Rodney Plowman Restorations Facebook Page which details every step of the restoration!

Share
Tar Topper Battery Cover Red

Ford & GM Battery Tar Toppers

We’re now stocking Tar Toppers that give your car that vintage appearance whilst allowing the use of modern Group 24 batteries.

Stocked in two styles, Red Caps that suit 1960’s & Early 1970’s Fords, plus Yellow Caps generally found on early GM vehicles.

Made from durable ABS and each has 8 1/4″ (Centre to Centre) Pole Holes.

Share
Master Chassis Hardware Kit XW-XY

Master Chassis Hardware Kits for XW-XY are here!

We’re pleased to announce that we’ve finally got round to putting together an all-in-one Master Chassis Hardware Kit for XW-XY Ford Falcons!

This 329 Piece Master Chassis Hardware Kit contains all the bolts/nuts/hardware for all models including 6/V8 and Auto/Man transmissions.

Please note that all parts can also be purchased individually or we can custom package a kit for you.

Share

2019 GT Nationals Sponsors!

We’re proud to be supporting the 2019 Falcon GT Nationals as naming rights sponsors….this means you have less than 12 months to go, so if you need any new parts (or any last minute work done via sister business Rodney Plowman Restorations) to your GT, you better contact us or book your beast in soon!

2019 GT Nationals Sponsor

Share

XW-XY VDO Clock LED Stand-Off Mod

One of the biggest benefits of being the parts division of a restoration company is the fact we can use & modify our products in situ, giving us immediate feedback on products we develop and manufacture in house.

An example of this is our LED dash light replacement kits, which have had an amazing response. We’re often asked however, why we do not include replacement clock globes in our XW-XY & XA/XB kits and this is due to the poor design of the VDO clock itself (early XW Clocks with the pigtail can purchase our LED Clock Globe already).

As we all know, with a standard globe fitted, illumination is almost non-existent and upgrading this to an LED emits a little bit more light, however the output is still limited. So we did some R&D and designed a standoff and pigtail that made upgrading to an LED worthwhile. Manufactured in-house these stand-offs are designed to replace the original globe holder and are supplied with a green LED globe pre-fitted.

Simply undo the two nuts that hold the original holder in place and switch the holder to the new stand-off. As you can see from the photos (standard globe left, stand-off right), the results are chalk and cheese!

These units have been tried and tested for the last few months in-house and will be available in the coming weeks 🙂

LED VDO Clock Globe Stand-Off LED VDO Clock Globe Stand-Off LED VDO Clock Globe Stand-Off

Share